Characteristics of colour steel tiles, resin tiles and laminated anti-corrosion tiles

Release time：

2021-10-20

Colour steel tile has light weight, high strength characteristics so is widely used, but colour steel tile wind resistance is weak, in strong windy weather, may be blown off, causing loss and most colour steel tile is not have good heat insulation performance, when the house indoor temperature is higher than the outdoor temperature, colour steel tile surface layer is easy to condensation, leading to its rust, thus causing its service life to be shortened, colour steel tile surface layer of paint if it is to If you want to keep its original performance and colour, you need to carry out regular spray paint maintenance treatment, so that its later maintenance costs are higher.

When it comes to resin tiles, the first thing that strikes you is their bright colour. Because there are fewer joints and the tiles can be covered as a whole, the waterproofing of resin tiles is very good. But in the case of high temperature will be deformed, insulation performance is poor, but also in the - 30 degrees to 70 degrees below the temperature leads to sagging or drum, reduce its waterproof effect and not suitable for the slope of less than 15 degrees of roofing, so not suitable for use in casting, smelting, steel and other high temperature areas of the roof tile. Resin tile production process added plasticizer and a large number of heavy calcium carbonate to increase the flexibility of resin tile and this additive has a combustion effect, so the production of synthetic resin tile is not in line with the fire requirements and poor weather resistance.

The birth of fine steel laminated tiles (ASA plastic steel composite plate), that is, to solve the problem of rust and corrosion of colour steel tiles and solve the problem of poor performance of resin tiles easy to age!

The steel laminate tiles (ASA plastic steel composite panels) are made of extremely high quality heat reflective material, which can reflect up to 81% of light and heat. The thermal conductivity of the steel composite material is also very low, as low as 2.93 W/m.k. It can effectively isolate and reflect the heat radiation generated by infrared rays and has very good thermal insulation properties, then the steel laminate tiles (ASA plastic steel composite panels) meet the performance of keeping the workshop dry and low temperature requirements.

The steel laminated tiles (ASA plastic steel composite panels) have the exclusive technology of "multi-layer composite anti-corrosion technology", which is patented by the State, and can resist acid and alkali corrosion for more than 10 years in a strong corrosive environment. Then the steel laminated tile (ASA plastic steel composite panel) is suitable for all kinds of strong corrosive environment plant.

Statement: This article is from other media, does not represent the views and position of this website. (Content reprinted from: Bajia / Steel Cladding Tile Centre)